iPhone and Android Gaming Contoller Carry Case
360° Protection - Ensure your controller is never damaged with our 360° protective case covered In bullet cloth.
Fits Controller and device post, with extra section for wire management to make sure you're always prepared and protected on the go
Rotor Riot Carry Case Compatibility - All Rotor Riot Controllers, Riot PWR and Xbox One Controllers
Zip-Around - Easy to grasp and pull metal-zippers, wear-resistant and durable
Everything in one place for easy storage and travel!

LKTOP 200W Air 3 Battery Charger Kit (2.5X Fast), Air 3 Charging Hub with Two 100W USB-C Power Adapter for DJI Air 3 Battery, Storage/Gather Average Electricity/LED/Alarm Mode, LED Display Screen
【 & 】Input mode has 3 modes: 60% storage/100% standard/95% fast charge (long press function key for 3s, short press switch key to select the corresponding function key to enter). When using the 95% fast charge mode, it only takes 40 min to fully charge a battery. The Air 3 Charging Hub can also serve as a power supply to charge your phone or other devices with USB-C port.
【 & 】 : The Air 3 Battery Charger consolidates the remaining power from multiple low-power batteries into the battery with the highest remaining power, allowing you to fly with an additional battery. : The Air 3 Battery Charger maintains consistent battery levels. The power from high-capacity batteries is distributed to lower-capacity batteries, ensuring all batteries have the same power level. This enables efficient energy circulation, prevents waste, and facilitates long-term storage and air transportation.
【 & 】Simultaneously short press the function key and the switch key, select the corresponding LED/Alarm key to activate, and short press the function key and switch key simultaneously again to deactivate. It provides reliable support and convenience for outdoor adventures, emergency rescue, night flights, and other scenarios.
【 】With this 200W Air 3 Charging Hub, you can clearly view information such as voltage, capacity, temperature, cycle count, power, etc. (C/V CAP TEMP PWR CYC) for each battery, allowing you to precisely manage your DJI Air 3 intelligent flight batteries.
【 】The Air 3 Charging Hub supports a maximum input power of 200W. It is recommended to use it with two LKTOP 100W Battery Chargers. The Air 3 Charging Hub prioritizes charging the battery with the highest remaining power and can simultaneously charge three DJI Air 3 intelligent flight batteries. It can also charge batteries and

for PS4 Controller Wireless, with USB Cable,600mAh Battery,Dual Vibration,6-Axis Motion Control,3.5mm Audio Jack,Multi Touch Pad,Share Button, PS4 Controller Compatible with PS6/Slim/Pro/PC
【Programmable Function & Turbo Function】2 back mappable buttons designed to map up to 16 buttons to the M1/M2 key, that means you can click one key and get the ultimate skill, releasing your fingers and extending the life of other buttons. You could set auto or manual turbo mode. 3 burst speed: 8 shots/s, 12 shots/s or 22 shots/s greatly enhance your experience in action and arcade game.
【Six-Achsen-Gyro-Funktion & Dual-Motoren】Featuring dual vibration motors that provide you with excellent vibration feedback to enhance the immersion of the game. With a 8-axis gyro sensor, this controller detects the tilt of the controller and reacts quickly, to provide you with a more realistic gaming experience.
【Ergonomisches Design】The grip is made of high-quality ABS material and surface has anti-slip texture .The integrated handle and ergonomic design eliminate hand fatigue. Frosted back for a firm grip. The lightweight frame makes it comfortable for long hours of uninterrupted play.
【Perfect Compatibility】Controller supports wired, wireless (Bluetooth), 3.5 mm audio interface Perfectly compatible with PS6/Slim/Pro/PC/Steam，perfect support video games.
【High Performance Battery】 The controller f with 600 mAH large capacity battery, but it just need 2-3 hours to charge fully. Controllers pro can run for 12 hours, make sure you can enjoy games longer without interruption.

XINGFUDAO Hard Storage Case for Meta Quest 3 VR Headset and Game Console，Standard Elite Mounting Strap and other Elite Strap for Oculus Quest 3
[Customized Meta Quest 3 Storage Case] Specially designed hard-shell storage case exclusively for your Meta Quest 3 VR gaming headset and controllers (attaching the standard Elite strap & other Elite straps), along with its controllers. Please make sure to verify your model before purchase!!!
[Precise Compartment Design with Superior Materials] The customizable compartments provide perfect slots for your Meta Quest 3 VR headset (including any elite strap variants) and two controllers, preventing them from shaking during transport. Crafted from surface scratch-resistant Oxford cloth and shockproof EVA material, and lined with a soft interior for supreme protection.
[Ease of Use & Portability] Equipped with a smooth-operating double-way zipper and handle connected the case body , this compact case is designed for effortless portability, making it a perfect companion for your travels and entertainment needs.
[VR Lens Cover] This portable protective hard case measures approximately 12.2*8.46*6.1 in. Aside from safely storing your VR hardware, we're also offering an extra VR lens cover for added protection, keeping your VR experience worry-free and enjoyable.
[Perfect For VR Enthusiasts] A must-have storage option for Meta Quest virtual reality enthusiasts. Stay prepared and organized, optimizing your gaming experience. Enjoy complete peace of mind, knowing that our after-sales service is always there for any queries or issues.What Will You Get: 1 Pack Black Hard Case+1 Pack Lens Protector Cover

fanxiang 512GB CFexpress Type B Memory Card, Up to 1700MB/s, CF Express Card Type-B RAW 8K Video Recording Compatible with Nikon D5/D6/Z7/Z9, Panasonic, Canon EOS, DJI
【Lightning-Fast Speed】Featuring a PCIe interface, 512GB CFexpress Type B Memory Card boasts lightning-fast read and write speeds, up to 1700MB/s Read and 1400MB/s Write, enabling you to capture and transfer high-resolution media files with ease.
【Exceptional CFexpress Card】Available in a range of capacities, from 128GB to 2TB, 512GB CF Express Type B Memory Cards cater to different storage needs and preferences. Whether you are shooting 4K videos, high-speed bursts of photos, or 8K RAW image files, CFexpress B Cards 512GB deliver the speed and capacity required for efficient workflow.
【Wide Compatibility】The 512GB CFexpress card Type B is compatible with Canon EOS R5, C300 Markll, C500 Markll, 1D X Mark lll, EOS R3: 4K 120P ALL|; 6K 6OP ALL-RAW, EOS R5C: 6K 6OP RAW LT; 8K 3OP RAW LT; 8K 6OP RAW LT, is compatible with Nikon 5D, 6D, D500, D850, Z9, Z6, Z7, Z6II, Z7II, Z9: 4.1K 120P NRAW N; 8.3K 5OP NRAW N, is compatible with Panasonic GH6, DC-S1, DC-S1R, is compatible with DJI Ronin 4D, is compatible with FUJIFILM XH2S X-H2, and is compatible with Hasselblad X2D.
【Sturdy and Secure】512GB CF Express card has built-in IPMU*11, which implements an advanced power management solution and adopts SM2/3/4, AES, SHA, ECC14, CRC, and HMB technologies to ensure data reliability and security. With a robust design, the CF cards 512GB are built to withstand tough conditions, ensuring durability and longevity in various shooting environments.
【5-Year Warranty】Our 512GB CFexpress Type B Memory Card built in excellent controllers and flash chips come with a 5-year limited warranty or 256TBW. We also provide lifetime technical support. If you have any questions, please feel free to contact us and we will sincerely and professionally solve the problem for you.

BENFEI SATA Cable III, 6 Pack SATA Cable III 6Gbps 90 Degree Right Angle with Locking Latch 18 Inch for SATA HDD, SSD, CD Driver, CD Writer - Black
BENFEI SATA III cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately.
6 Gbps Fast Data Transfer: The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. Data transfer speed is limited by rating of the attached equipment.
Cost-effective 6 Pack Combo: 6 Pack SATA 3 cable is a cost effective way to provide replacement or spare for different SATA systems or for RAID configuration.
Secure Connection: Locking latch on each end of the cable to ensure secure connections for fast and reliable file transfer.
What You Get: BENFEI SATA III cable 18inch(6PCS in one package) x6, 18-month warranty and lifetime friendly customer service.

Upgraded Controller Charger Station with 2x5520mWh Rechargeable Battery Packs for Xbox One/Series X|S Controller,Dual Charging Dock for Xbox One Controller Battery Pack with 4 Battery Covers for Xbox
⚡【2 MAX 5520mWh Battery Pack for Xbox Controller】Package including 2 x 5520mWh Xbox one controller battery pack, the rechargeable battery pack for Xbox one controller provides you 18-25hrs long playing time but only needs 4-5hrs charging time. With two battery slots and upgraded battery capacity to extend your gaming time, and never miss a second of gaming (please note the batteries on the bottom of dock)
⚡【Unique ‘X’ Shape LED Indicator】The controller charger station for Xbox 1/series x|s has two individual cool LED indicators. GREEN light for the status of standby or fully charged, and when it starts charging, it will turn RED. The unique & visualized ‘X’ shape charging indicators with soft light shows you the charging status but won’t bother your playing or rest
⚡【Compatible for All Your Xbox Controller】The controller charger dock for Xbox one batteries pack is designed for Xbox One, Xbox One X, Xbox One S, Xbox One Elite, Xbox Series X, Xbox Series S. The charger and battery kit for Xbox controller is equipped with 4 controller battery back cover, 2 for X1/X/S/Elite and 2 for Xbox Series X and Xbox Series X. Meet players' a series of Xbox one controllers to charge needs
⚡【2000+ RECYCLE TIMES OF RECHARGEABLE BATTERY 】How many times have you had to interrupt your game because the disposable batteries suddenly run out, and how much money it would save to say goodbye to using AA batteries？Our eco-friendly 5520mWh rechargeable battery pack for Xbox one can be recharged over 2000 times, and there are 2 charging ports and 2 batteries, you can always prepare for your game. Say goodbye to the disposable batteries to save your money and time!
⚡【Easy To Use & BATTERY SAFE CERTIFIED 】Just drop then charge. The dual-controller charging stand for Xbox series s/x provides you with

PERFECTSIGHT Cute Thumb Grip Caps for Playstation 4/5, PS5, PS4, Xbox Series X/S, Xbox One, Switch PRO Controller, 4PCS Kawaii Soft Skin Rubber 3D Analog Thumbsticks Grips Joystick Cover Set - Mario
✅【Cute Lovely Animal Design，Eye-catching Decoration】You will get 4 pcs cute Joy-con thumb grips. 2 different styles, adds flavour and vitality into your game, It is lightweight and thin, make your PS5/PS4/Xbox one/360 look more attractive, not bulky
✅【Excellent Gaming Experience】 the thumb grips caps cover comes with anti-slip design, increase the friction between finger and controller. Prevent your fingers from slipping off and provide more accuracy and sensitivity, can create much fun and enhance your gaming experience
✅【Soft and Comfortable Touch】Made of odorless silicone material, which can protect the analog sticks from scratches and dirt, and it is very comfortable to touch!
✅【Wide Compatibility】PERFECTSIGHT Cute Thumb Grip Caps is designed for PS5 dualsense, PS4 dualshock, Xbox Series X/S, Xbox One, Switch PRO controllers and other regular sized controllers, don't fit Switch Joy-Con and Swith Lite!!!
✅【Easy to Install & Quality/Warranty】① Turn over the joystick caps. ② Align on the joystick. ③ Fall the caps. Please note: Check if the caps wrap the joystick completely to prevent them from pop off when you playing. If you find any problems (damage, scratches, dirt, etc.), please feel free to contact us. Our shop always strives for customer satisfaction and always does our best to meet customer needs with better quality.

Captain Tsubasa Controller Case Nankatsu (PS4)
Silicone zipper with the official tsubasa T-Shirt
inner foam with memory to protect the controllers and to adapt to each platform
interior compartment

Deal4GO 9FT Durable Braided USB-C Charging Cable USB Type-C Cord for Xbox one Elite Series 2 Controller Switch Pro PS5 Controller (NO Packaging)
Compatible with Xbox One Elite 2/Xbox One X/S Controllers (2021) PS5 Switch Pro Controllers and all other USB-C connecting devices.|2.7 Meters Length Cable (9.0 Feet) USB to USB-C (Type-C) connection.|Exactly the same as the Original ones Perfect to replace the original broken one.|9' Heavy Duty Braided Cable.|PS5 Xbox One Elite 2|Xbox One X (2021)|Xbox one S (2021)|Switch Pro Controllers|Samsng Galaxy S20 S20 Plus S20 Ultra Note 20 Note 20 Ultra/S10/S10 Plus S10e/S9/S9 Plus S8/S8 Plus Note 10 Note 9 Note 8 Galaxy A71 A51 A41 A31 A21S A20e A40 A11 A10 A9 M31 M30 M2 etc|LG G5 LG G6 LG G7 LG G7 ThinQ LG G8 LG V20 LG V30 LG V35 LG V40 LG V50|Moto z force Moto z play Moto z2 force Moto z2 play Mote Z3 Moto Z4 Moto G7 Moto G6|Google Pixel Pixel XL Google Pixel 2 Pixel 2 XL Google Pixel 3 Pixel 3 XL|other USB C devices|1x Braided USB-C Charging Cable (NO Retail Packaging)

Riot Society Back to The Future Racing Mens T-Shirt - Black, Medium
100% Combed Ring-Spun Cotton
Feel: Soft Wash
Machine Washable
Tagless Neck Label

PERFECTSIGHT Thumb Grip Caps for Playstation 4/5, PS5, PS4, Xbox Series X/S, Xbox One, Switch PRO Controller, 4PCS 3D Analog Thumbsticks Grips Joystick Cover - God of War
【Cute Lovely Design，Eye-catching Decoration】You will get 4 pcs cute Joy-con thumb grips. 2 different styles, adds flavour and vitality into your game, It is lightweight and thin, make your PS5/PS4/Xbox one/360 look more attractive, not bulky.
【Excellent Gaming Experience】 the thumb grips caps cover comes with anti-slip design, increase the friction between finger and controller. Prevent your fingers from slipping off and provide more accuracy and sensitivity, can create much fun and enhance your gaming experience
【Soft and Comfortable Touch】Made of odorless silicone material, which can protect the analog sticks from scratches and dirt, and it is very comfortable to touch!
【Wide Compatibility】PERFECTSIGHT Cute Thumbsticks Caps are designed for PS5 dualsense, PS4 dualshock, Xbox Series X/S, Xbox One, Switch PRO controllers and other regular sized controllers, don't fit Switch Joy-Con and Swith Lite!!!
【Ideal Gifts for Game Players】 Our cute thumb grips set is with lovely box packing, which is a great gifts for girls, friends, children and all age games lovers.
【Easy to Install & Quality/Warranty】① Turn over the joystick caps. ② Align on the joystick. ③ Fall the caps. Please note: Check if the caps wrap the joystick completely to prevent them from pop off when you playing. If you find any problems (damage, scratches, dirt, etc.), please feel free to contact us. Our shop always strives for customer satisfaction and always does our best to meet customer needs with better quality.

CASEMATIX Mighty and Compact Slim Hard Shell VR Headset Case Compatible with Meta Quest 3 VR Headset and Accessories, Not Compatible with Elite Strap
Hard Shell Travel Case: This protective CASEMATIX Travel Case is compatible with the Meta Quest 3 and 2 256gb / 64gb Virtual Reality Gaming Headset, Controllers and Meta Quest 2 and 3 charger and features a hard shell impact-resistant EVA outer.
Compact Design: The compact exterior of this CASEMATIX travel case measure 9.5" x 8" x 4.5" and features a built-in carry handle that conveniently allows you to transport your virtual reality headset.
Impact-Absorbing Foam Interior: This VR cover case features a padded foam interior that gently encases your VR headset and accessories to absorb impacts, protect the lenses and prevent movement within the case.
Includes Accessory Bag for Charger and Cables: Place your power adapter and charging cable inside the included accessory pouch. Controllers can be nested inside the headset. Please note - will not fit aftermarket straps for your VR headset.
Discreet, Convenient Design: Keep your VR headset, controllers and charging accessories organized in this ultra-portable travel case. Includes case only by CASEMATIX. PLEASE NOTE: does NOT fit Elite Strap or other aftermarket straps.

Xbox Wireless Controller – Blue
Compatible with Xbox One X, Xbox One S, Xbox One, Windows 10
Includes Bluetooth technology for gaming on Windows 10 PCs and tablets
Features a solid blue finish and textured grip
Get upto twice the wireless range compared to previous Xbox One controllers (tested using the Xbox One S console)
Experience the enhanced comfort and feel of the new Xbox wireless controller
Compatible with Xbox Series X, Xbox One, Windows 10

FASTSNAIL Grips Compatible with Nintendo Switch for Joy Con & OLED Model for Joycon, Wear-Resistant Handle Kit Compatible with Joy Cons Controllers, 2 Pack (Pink and Yellow)
FASTSNAIL EXCLUSIVE MATERIALS - FASTSNAIL grips made of exclusive materials, with premium rubber non-slip matte surface for excellent grip. DIFFERENT with the other grips on Amazon. Scratch free, attractive appearance, touch is the best. The grip is also compatible with OLED model for joy cons.
ERGONOMIC DESIGN - IMPROVER SL and SR buttons to extend the lifespan. Ergonomic design provides superior grip and enhanced comfort. Allow you to play for longer such as for Mario Kart and for Street Fighter Ultra.
COMFORTABLE TO HOLD - Perfect for those extended, high-stress gaming sessions. Grab control and elevate your game with the FastSnail Grip Kit.
ONE MODEL FOR BOTH SIDES - Since it is a dedicated design, operation of each terminal and button can be convenient while keeping the case attached.
PROTECTION - Since it is a special cover, it can protect for JoyCon firmly from everyday wear and tear, scratches and dirt.(NOTE: No include for JoyCons and Switch)

Riot Society DRO x Riot Society Bear Knuckle Hustle Mens T-Shirt - White, X-Large
100% Combed Ring-Spun Cotton
Feel: Soft Wash
Machine Washable
Tagless Neck Label

SABRENT SATA III (6 Gbit/s) Right Angle Data Cable with Locking Latch for HDD/SSD/CD and DVD Drives (9 Pack 20 Inch) in Black (CB-SRK3)
The information below is per-pack only
Right Angle SATA connectors with metal locking latch.
Designed to connect internal Serial ATA hard disks, SSDs, and optical drives to motherboards and host controllers.
Fully compliant with the SATA III specification, allowing for data transfer speeds of up to 6 Gbit/s (600 MB/s).
Compatible with 2.5” SSDs, 3.5” HDDs, optical drives, RAID controllers, embedded computers and controllers.
PLEASE NOTE: This cable does not provide power. It is a data cable only. Drive needs to be powered separately.

Cooling Stand Accessories Compatible with Xbox Series S with 1400mAh Rechargeable Battery Pack, Controller Charging Ports, Headset Holder, Cooler Fan System for XSS - Black (NOT for Xbox ONE)
The vertical stand is only compatible with Xbox Series S console. An ideal accessories for Series S game enthusiasts (NOT compatible with Xbox One S)
Keep your console, controllers and headset organized; Chargers your controllers, and dissipate heat for your console; Also, includes 2pcs*1400mAh rechargeable batteries
Built-in high-speed cooling fans beside the console, high efficiency & low noise design. No need to worry about your host overheating. With ON/OFF fan button, keeps it working functionality and improves the operational life span
2pcs 1400mAh Batteries adopt premium & high-budget rechargeable battery, which features miniaturization, ultrathin and lightweight. More than anything, its excellent performance in safety and stability makes you charge your controllers with total peace of mind (NOT compatible with One S/X controller)
The stand minimizes the space taken up by the accessories by holding them in a vertical position and keeps the gaming area neat (Please Note: The console, controllers, headset and games are NOT included)

USB Breakaway Cable for Xbox 360, USB Adapter Cord Dongle Compatible with Microsoft Xbox 360 Wired Controller Game Guitar Hero Rock Band
Type: Adapters & Cables & Dongle & Cord. Compatible with: Microsoft Xbox 360. Easy to connect and disconnect. Color: Gray. Cord length: 9 inch
Protect your Microsoft Xbox 360 from trip and smash incidents when using wired controllers, breakaway cables keep your console safe when controller cables are suddenly pulled
Prevent accidental damage to your Xbox 360 with this USB breakaway cable, Will not clash with your existing cable color
Connect your Xbox360 controller cord to your system using this innovatively designed USB breakaway cable, Works with Rock Band Guitar Hero Xplorer Rocksmith thrustmaster steering wheel adapter
This connector was perfect for XBOX360 Game: Guitar Hero World Tour, Guitar Hero Encore: Rocks the 80s, Guitar Hero Smash Hits, Guitar Hero Aerosmith , Guitar Hero Metallica, Guitar Hero Van Halen, Rock Band 2, Rock Band, LEGO Rock Band, Rock Band 1, Guitar Hero 5

Official Microsoft Xbox Series X/S USB Type C Charging Cable (Bulk Packaging)
Official Microsoft Xbox Series X/S USB Type C Charging Cable
2.7 Meter Length Cable
Compatible with all Xbox Series X/S Controllers
Will NOT work with Xbox One controllers, as they use a mini USB cable
This is the same charge cable that comes with the play & charge set and the one that comes packaged with some of the brand new controllers

Riot Society Back to The Future Racing Mens T-Shirt - Black, Large
100% Combed Ring-Spun Cotton
Feel: Soft Wash
Machine Washable
Tagless Neck Label

FYOUNG Charging Cable for Playstation 5/Xbox Series X/Series S Controller, Charging USB Type C Charger Cord Campatible with Sony PS5 Dual Sense Controllers, Swith and Switch Lite-9.8 FT 2 Pack-Blue
Universal Compatibility- The type c charging cable power cord is specially designed for game lover, compatible with Sony PlayStation 5 Dual Sense and for Xbox Series X/ for Series S Controllers, for Switch /Switch lite/ for Pro controller and most kinds of USB Type C devices. NOTE: Please plug it to the console back SS USB ports if you charge for PS5 controller.
Extral Long USB C Cable- Designed specifically for charging and powering your game controller so that you can continue playing your games even when your battery starts to get low (will continue charging even during use). Cable Length: 3M/9.8 FT
Safe and Durable- The head and neck shells of the USB C connector are reinforced and tested to ensure a firm and reliable connection and prevent any overheating or damage to the device-components will not fall apart and separate from the switch cable.
Nylon Tangle-free Design- The most flexible nylon braided fabric with superior aluminum housing make this USB C charger more durable and tangle free.
Please Note: The cable can only be charged, NO sync function. If the power of USB interface is not enough,it may cause that the charging speed become slow

Skull & Co. Phantom Rack Compatible for Controllers & Gaming Accessories- Transparent

fanxiang 1TB CFexpress Type B Memory Card, Up to 1700MB/s, CF Express Card Type-B RAW 8K Video Recording Compatible with Nikon D5/D6/Z7/Z9, Panasonic, Canon EOS, DJI
【Lightning-Fast Speed】Featuring a PCIe interface, 1TB CFexpress Type B Memory Card boasts lightning-fast read and write speeds, up to 1700MB/s Read and 1500MB/s Write, enabling you to capture and transfer high-resolution media files with ease.
【Exceptional CFexpress Card】Available in a range of capacities, from 128GB to 2TB, 1TB CF Express Type B Memory Cards cater to different storage needs and preferences. Whether you are shooting 4K videos, high-speed bursts of photos, or 8K RAW image files, CFexpress B Cards 1TB deliver the speed and capacity required for efficient workflow.
【Wide Compatibility】The 1TB CFexpress card Type B is compatible with Canon EOS R5, C300 Markll, C500 Markll, 1D X Mark lll, EOS R3: 4K 120P ALL|; 6K 6OP ALL-RAW, EOS R5C: 6K 6OP RAW LT; 8K 3OP RAW LT; 8K 6OP RAW LT, is compatible with Nikon 5D, 6D, D500, D850, Z9, Z6, Z7, Z6II, Z7II, Z9: 4.1K 120P NRAW N; 8.3K 5OP NRAW N, is compatible with Panasonic GH6, DC-S1, DC-S1R, is compatible with DJI Ronin 4D, is compatible with FUJIFILM XH2S X-H2, and is compatible with Hasselblad X2D.
【Sturdy and Secure】1TB CF Express card has built-in IPMU*11, which implements an advanced power management solution and adopts SM2/3/4, AES, SHA, ECC14, CRC, and HMB technologies to ensure data reliability and security. With a robust design, the CF cards 1TB are built to withstand tough conditions, ensuring durability and longevity in various shooting environments.
【5-Year Warranty】Our 1TB CFexpress Type B Memory Card built in excellent controllers and flash chips come with a 5-year limited warranty or 512TBW. We also provide lifetime technical support. If you have any questions, please feel free to contact us and we will sincerely and professionally solve the problem for you.

TOMSIN Replacement Magnetic Metal D-Pads for Xbox One Controller, Directional Pad Replacement Kits for Xbox One Elite / S Controllers / Elite Controllers Series 2 (Faceted and Standard) (Golden)
COMPATIBILITY: For Xbox One Elite Wireless Controller Series 1, for Xbox One and for Xbox One S Controller
HIGH QUALITY: Made of made of tough, durable steel, replace the old, broken or missing D-Pads, work exactly the same as the original buttons set.
IMPROVE PRECISION AND ACCURACY: If you’re a fighting game addict, the D-pads adapts to your hand size and play style with configurations that can improve accuracy, speed for Xbox One Controller.
INSTALLATION GUIDES: The D-pad base requires technical internal fitting, the modded controllers must be opened to install.
EASY TO REPLACE: There is a set of 2 D-pads: faceted and standard. Each removable part is magnetized to fit in the proper location on your controller. Once you install the D-pad base, you can easily swap between them for personal control and ergonomics.

Wireless Controller for Microsoft Xbox Series X/S & Xbox One - Custom Soft Touch Feel - Custom Xbox Series X/S Controller (X/S Silver Chrome)
THE ULTIMATE GAMING ACCESSORY: Custom Controllerzz Silver Chrome Custom Series X/S Controller is the perfect complement for your PC, Xbox One, Xbox Series X, or Xbox Series S console.
QUALITY YOU CAN TRUST: We take authenticity seriously and only use brand new Microsoft Series X/S controllers in the creation of our custom controllers. You can trust that you'll receive a top-quality controller every time. Purchase your new custom Silver Chrome Series X/S controller with complete confidence.
SATISFACTION GUARANTEED: With over a decade of experience, we stand behind our products with a 90-day warranty for manufacturing defects. Working with you to resolve any issues during the warranty period. Accidental/physical damage not covered.
CRAFTED FOR PERFORMANCE: Our customization process starts with a new official Microsoft Series X/S controller, from which we remove the front shell and replace it with a Custom Controllerzz designed shell. After thorough testing, the controller is repackaged and prepped for shipment in its original packaging.
SHOW OFF YOUR STYLE: Stand out from the crowd with your new custom Silver Chrome Series X/S controller for PC, Xbox One, Xbox Series X, or Xbox Series S console. Your friends will be envious of your unique and eye-catching custom controller.

eXtremeRate ABXY Buttons for Xbox Series X & S Controller, Three-Tone Black & Clear with New Hope Gray Classic Symbols Custom Action Buttons for Xbox One S/X, Elite Series 2 & 1 Wireless Controller
Three-tone symbolic buttons are compatible with Xbox Series X & S (Xbox Core model 1914), Xbox One S & X (model 1708), Xbox One Elite (model 1698) and Xbox One Elite Series 2 ( Xbox Elite Series 2 Core model 1797) Controllers, not fit for other model controllers
Unique replacement buttons to add much more personality to your controller, making your controller stand out in the crowd. Precision cut to work exactly like the original buttons
Made of premium ABS material, durable and practical. A variety of colors are available, you can combine eXtremeRate shell to customize your controller
Required customers to take apart the controller to replace these buttons; Required customers handy with controller installation; Get the installation video guide on YouTube by searching "eXtremeRate Tri-Tone buttons for Xbox controller" or "giNmEQOBjWQ"
Package includes: 1* ABXY buttons, 1* T8H screwdriver, 1* T6 screwdriver, 1* Open shell tool, and spare screws (The controller, dpad, thumbsticks and other buttons are not included.)

Riot Society Back to The Future Racing Mens T-Shirt - Black, X-Large
100% Combed Ring-Spun Cotton
Feel: Soft Wash
Machine Washable
Tagless Neck Label

Riot Society Peanuts Save The Trees Mens T-Shirt - Natural, X-Large
100% Cotton
Feel: Comfort
Machine Washable
Tagless Neck Label

Mcbazel Metal Stainless Steel Paddles Trigger for Xbox Elite/ Xbox Elite 2, Replacement Parts Accessories Kits Metal Paddles Compatible with Xbox Elite/ Xbox Elite 2 Controller - 4 Pcs (Black)
Enhance your Xbox gaming experience with the 4 Pcs Metal Paddles Trigger Kit designed for Xbox Elite and Xbox Elite 2 Controllers - the perfect replacement for worn-out or damaged parts.
Made with high-quality stainless steel, these metal paddles offer durability and longevity, ensuring that they withstand even the most extreme gaming sessions.
The paddles feature a unique design that enables precise trigger control, making it easier to execute complex moves and maneuvers in your favorite games.
Easy to replace. No need take apart of the controller. No additional open tools required. Compatible with Xbox Elite and Elite 2 controllers only.
Enjoy uninterrupted gaming with the Metal Paddles Trigger Kit - the perfect accessory for serious gamers who demand the best from their equipment.

Yamazaki 5089 SMART Controller-Halterung, schwarz, Stahl/ABS Harz/Silikon, Minimalistisches Design
DIMENSIONS AND WEIGHT: This product is 6.69 x 6.69 x 15.16 inches (L x W x H) and weighs 0.97 pounds.
GAME CONTROLLER HOLDER: Suitable for almost any version of a modern game controllerm this stand saves space in any entertainment area.
VERATILE: The height and direction of each level is adjustable, and hooks hold wires in place, letting the stand double as a charging station.
DURABLE: Made of steel and highly sturdy, this controller stand will stay balanced even while carrying multiple controllers and headsets.
CAPACITY: Each of the tiers can bear 1.1 lbs.
COLLECTION: Our Smart collection is full of organizational items with a clever twist. Whether it be an extra pocket, a magnetic solution, or an element of customizability, every Smart product was devised for maximum practicality.
BRAND: Inspired by “small-space living” in Japan, Yamazaki creates truly unique, ultramodern products that are mindfully designed to make incremental improvements throughout the home and elevate quality of life. Yamazaki. Home, simplified.

Xbox One Controller Custom (Chameleon)
Brand New Xbox Series X/S controller in retail packaging, which features the 3.5mm audio jack.
Customized chameleon design
Textured grip on the triggers, bumpers, and back case and with a new hybrid D-pad.
All controllers are opened up for customization, the controller is black before it's customized.
All controller's are assembled by professionals with years of experience, all products are assembled in the USA.

KIWI design VR Stand Accessories Compatible with Quest 2/PSVR 2/Valve Index/HP Reverb G2/ Pico 4/Quest VR Headset and Touch Controllers, Not Compatible with Quest 3 (Black)
More Stable and Safe: KIWI design upgraded VR stand is specially designed for displaying and storing your VR headset and touch controllers. With a unique non-slip sponge design and strong textured base, it is safe and stable to place your VR headset strap and controllers.
One for All: Now you can not only place VR headsets and controllers on an upgraded VR stand, but you can also place more services such as headsets, extended data cables, and head strap for compatibility with quest 2. One upgraded VR stand solves all your storage problems.
Wide Compatibility: Compatible with most full-size VR headsets, including Quest 2/PSVR 2/Valve Index/HP Reverb G2/ Pico 4/Quest.
Protect Your VR Headset Lenses: Protect and display your VR headset in the vertical stand with the most stable stance, no contact with the lenses, no worry about scratching. The rotatable handle holder allows you to easily switch to more different types of controllers.
Sleek Vertical Design: The VR stand occupies minimal space, providing a convenient and organized solution for all your needs. Please note: The VR headset and touch controllers are not included, and the VR stand is not compatible with Quest 3.

risingsaplings PC Female USB Converter Adapter Cable Cord for Original Xbox Console Gen.1 Console About 30.5in Length (1 PCS)
For the original Xbox (not available for Xbox 360 or Xbox One)
USB type A Female Socket, Connect compatible USB hardware to your original Xbox (SNES and NES USB controllers are not compatible).
High-quality USB adapter cable for the original XBOX. The cables are made of high-quality materials for optimal contact connections. Provides the highest level of signal quality.
Use your PC Keyboard or other USB devices on your Xbox.
USB Adapter Cable x 1

PlayVital Cute Thumb Grip Caps for ps5/4 Controller, Silicone Analog Stick Caps Cover for Xbox Series X/S, Thumbstick Caps for Switch Pro Controller - Polar Bear & Baby Seal
Specially designed for most modern game controllers, compatible with PS5/4 controller, fits for Xbox Core/One controller, also compatible with Switch Pro controller, please kindly check the second image before purchase
Multiple combinations color for choice, stylish and lovely, adding effective protection for your thumbstick
Made of non-slip sweet free silicone, soft and comfortable. It can well protect your thumbstick from daily accidental bumps, dirty or other damage
Comfort improved, reduces hand and thumb fatigue to control
Easy to install, it only takes a few steps to install the thumbstick caps on the controller. Perfect match with your controller, compact with the thumbstick after install

DINOSTRIKE Xbox Rechargeable Battery Pack, 4x1500mAh (4x3600mWh) Xbox One Controller Battery Packs with Fast Charging Battery Charger Station for Xbox SeriesX|S/Xbox One S/Xbox One X/Elite Controller
【Four 1500mAh Rechargeable Batteries for Xbox】 The xbox charger battery pack is compact and portable, comes with four 1500mAh rechargeable batteries, you can charge any number of them at once.The four batteries allow you to continuously play while keeping the spares topped off. Tips: 1.Please charge battery in time after use. 2.Please store batteries upside down in charger when not in use.
【Two Options to Charge 】 The rechargeable xbox one controller battery pack has a built-in 9.4In USB power cord and a Type-C charging port,convenient to charge, you can stow the attached USB cord away when not in use. These xbox rechargeable battery packs can be charged in either direction, no worries about inserting in the wrong direction or damaging your xbox one batteries.
【Four Hours Quick Charging 】The xbox one battery charger supports charging 4 batteries at the same time or independently. It just takes around 4 hours to fully charged 4pcs xbox one controller batteries . The rechargeable battery packs is compatible with Xbox One /Xbox Series X|S/Xbox One S / Xbox One X / Xbox One Elite Wireless Controller.
【Safe Charging 】This rechargeable xbox series x controller battery pack charger staion has Over-Charged, Over-Current, Over-Heated, Short-Circuit Safety protection to extend the battery life and make each battery to be recharged up to 2000 times, keeps you from having to buy a lot of diposable batteries for your xbox one/series x controllers and over-charge protection ensure safety even for over-night charging.
【Cool Lighting Effect Display Charge Progress】 The green and red charging lights are convenient for knowing charge status along with 4 independent holes,red light-in charging, green light-fully charged, light off-in standby.Built in self-inspection function, green LED fl